Pre-Routed Vinyl Fence Posts for Easier Installation
At NORTHERNLINE®, we use our in-house routing table to offer pre-routed vinyl fence posts.
We can cut the post holes before shipping the materials to your job site. Instead of ordering a routing template, setting up a router, and cutting the holes yourself, you can receive posts that are ready for installation.
For contractors, this option saves time, reduces extra steps, and keeps the installation process moving smoothly.
Why do contractors like pre-routed posts?
Pre-routed posts make vinyl fence installation much simpler.
Because we cut the post holes ahead of time, contractors spend less time measuring, marking, and routing on site. This helps crews stay organized and keeps the installation moving.
Pre-routed posts offer:
- Faster installation
- Less time spent on site preparation
- Cleaner and more consistent post holes
- Fewer tools needed on site
- No need to order or use a routing template
- Less risk of making cutting mistakes in the field
For contractors installing multiple sections of vinyl fencing, this can make a big difference. We prepare each post for its specific place in the layout, allowing the crew to focus on setting the posts, installing the rails, and completing the job efficiently.
What are pre-routed posts?
Pre-routed posts are vinyl fence posts with rail holes already cut into them.
Each post’s location in the fence layout determines where we cut the holes. Some posts only need holes on one side, while others need holes on two opposite or adjoining sides.
That is why you need to know the fence layout before ordering.
What are the main types of routed posts?
End Posts
Contractors use end posts where a fence line stops.
We route these posts on one side because the rails only connect from one direction. You will usually see end posts at the beginning or end of a fence run, beside a gate, or where the fence meets a wall, building, or another stopping point.
Line Posts
Contractors use line posts in the middle of a straight fence run.
We route these posts on two opposite sides, allowing the rails to connect one panel section to the next. Line posts are the most common post type along a straight run of fencing.
Corner Posts
Contractors use corner posts where the fence changes direction.
We route these posts on two adjoining sides so the fence can turn a corner. A fence layout usually requires corner posts wherever it makes a 90-degree turn or changes direction.
Why does the fence layout matter?
Pre-routed posts are only helpful when the correct post type is ordered for each location.
Before ordering, you need to know:
- The total fence length
- Where the fence starts and stops
- Where the corners are
- Where the gates are
- How many straight runs are in the layout
- What height and style of fence is being installed
A simple drawing can make this much easier. It does not need to be fancy, but it should show the fence runs, corners, gates, and measurements.
Can NORTHERNLINE® help with the materials list?
Yes. If you send us a basic drawing with measurements, we can help build a materials list for your project.
This helps make sure you are ordering the right number of panels, posts, gates, caps, and accessories. It also helps us identify which posts need to be end posts, line posts, or corner posts.
Still need help?
Send us a drawing with your fence measurements, gate locations, and layout details. Our team can help build a materials list and make sure your pre-routed posts are ordered correctly.